Rate this item
  • 5.00 / 5 5
(2 votes)

Haze meter created by CHNSpec is intended for plastic, films, glass, LCD panel, bit screen alternative clear and semi-transparent materials color, haze and coefficient activity.

  1. 1. These are new haze meter produced by CHNSpec Tech.-Click the pictures for more details

CS-720 Color and Haze Meter-

CS-700 Haze Meter

CS-700 Haze Meter

Type CS-720 Haze Meter CS-700 Haze Meter
Light Source Haze/Transmittance:CIE-A,CIE-C,CIE-D65

Chromaticity Value:A,C,D50,D55,D65,D75,F1~F10,

F11,F12,CMF,U30,DLF,NBF,TL83,TL84

CIE-A,CIE-C,CIE-D65
Standards ASTM D1003/D1044,ISO13468/ISO14782

CIE No.15,ISO 7724/1,ASTM E1164,
DIN 5033 Teil7,JIS Z8722 Condition c standard

ASTM D1003/D1044;

ISO13468/ISO14782;

Parameters Color, haze and transmittance haze and transmittance
  1. Haze Meter Introduction

Haze is the light deviated from the incident light which is greater than 2.5 ° compared to the total transmitted light.

Transmittance is the total incident light compared to the total transmitted light.

Haze meter is designed for plastic, films, glass, LCD panel, touch screen other transparent and semi-transparent materials color, haze and transmittance measurement.
◆ Conform to ASTM and ISO standard.
◆ 3 kinds of light sources A,C and D65 for measurement.
◆ CS-720 is with powerful color measurement function, it provides all measurement indexes and light sources.
◆ Open measurement area, no limit on sample size. Vertical measurement is also available.
◆ 5.0 inches TFT display screen.
◆ Instrument is with haze and transmittance measurement software.

  1. Haze Meter Instrument Structure
  
How to use the instrument?
◆ third standardisation and 100 percent standardisation
Note: If we have a tendency to calibrate instrument below ISO commonplace, the compensate port ought to be open (the cowl ought to be taken off). If it’s below ASTM commonplace, compensate port ought to be lined.
When 100 percent standardisation is finished, we are going to get incident light-weight flux T1 and scattering light-weight flux T3, so save them to calculate haze and coefficient.◆ ASTM commonplace
When coefficient is measured, sample are placed on activity aperture, blade can cowl the sunshine lure for activity, so we are going to get coefficient light-weight flux T2.
When haze is measured, sample are placed on activity aperture, blade can cowl the sunshine lure for activity, we are going to get coefficient light-weight flux T2. Then blade can come back to the compensate port, when live, we are going to get instrument and sample scattering light-weight flux T4.

◆ISO commonplace
When coefficient is measured, sample are placed on compensate port, blade can cowl the sunshine lure, then live, we are going to get incident light-weight flux T1 to interchange the 100 percent standardisation price. so place the sample on the activity aperture, blade position won’t amendment, when live, we are going to get the coefficientlight-weight flux T2

When haze is measured, sample are placed on activity aperture, blade can cowl the sunshine lure, when activity, we are going to get coefficient light-weight flux T2. Then blade can come back to the compensate port, when live, we are going to get instrument and sample scattering light-weight flux T4.

Haze Meter Application Examples
haze meter application

5.CHNSpec Haze Meter Advantages

Name CHNSpec Haze Meter Other Brand
Price Better user experience and half price Expensivre
Software custom made service We can design haze meter software according
to customer’s requirement
without
Storage 20000 samples 5000 samples
Light Source Haze/Transmittance:CIE-A、CIE-C、CIE-D65
Geometry 0/d
Spectral Response CIE Luminosity function y
Measurement Range 0-100%
Repeatibility ≤0.1

Next Post Spectrophotometer for Hydrolyzed Collagen Transmittance Measurement

Leave a Reply